Used Equipment Brackets Thermal Imagery

Brackets _____________________________________________________________________ Brackets For Our Rental Laser Systems All of the following brackets (and more) can be used with any of our Rental systems – the Optalign® series, Aligneo®, Rotalign® series or smartALIGN® systems. If you do not see a bracket or bracket component that you need to rent with our system please call 704-233-9222 or send us an email. _____________________________________________________________________ ALI 2.230 Magnetic Sliding Bracket Assembly (click) ALI 2.230 Magnetic Sliding Bracket Assembly ALI 2.230 Magnetic Sliding Bracket assembly. This Magnetic Sliding Bracket is a special bracket that allows measurement and alignment to be performed when one or both shafts cannot be rotated. It is placed against the back of the solid coupling hub or front face of the uncoupled shaft and slides around from one measurement position to the next. Suitable for shaft and coupling diameters from approx. 3-1/8" and up. Comparison between the ALI 2.230 Magnetic Sliding Bracket assembly shown above and a single ALI 2.112 Standard Magnetic bracket with an L220 Stationary position adapter (Sliding Wing) mounted. Note: All brackets shown are available for rent. Magnetic Sliding Bracket Comparison (click)   Both arrangements shown to the right allow measurement and alignment to be performed when one shaft cannot be rotated. (Or when both shafts cannot be rotated – if you have two assemblies.) If you already are using a ALI 2.112set Standard Magnetic bracket set – request an L220 Stationary position adapter (aka Sliding Wing) to be able to use the combination on a non rotatable shaft. If you need to rent any of these brackets please call 704-233-9222 or send us an email. _____________________________________________________________________   ALI 2.2118 Offset Support Posts (click)     ALI 2.2118 Offset Support Posts, 7-1/8” (2 required per bracket side) These Offset Support Posts are very useful when there are clearance issues for the laser system sensors and can be used with the chain or magnetic brackets. ALI 2.244-L Offset Adapter (click)   ALI 2.244-L Offset Adapter is a replacement for the ALI 2.2118 offset support posts shown above. (1 required per bracket side) The Offset Adapter is very useful when there are clearance issues for the laser system sensors and can be used with the chain or magnetic brackets. _____________________________________________________________________ New Straightness Bracket Set – For Sale Straightness Bracket Set For Sale (click) Straightness Bracket Set in case (click) This Straightness fixed bracket set is designed primarily for use with the Rotalign® Pro and Rotalign® Ultra Systems and is used in performing X and Y axis Straightness measurements! All Rotalign® Pro and Rotalign® Ultra systems have optional Straightness firmware available through your local Prüftechnik AG Distributor. If you have a Rotalign Pro it already has the Straightness firmware installed but in the demonstration mode. The Rotalign® Pro Straightness firmware demonstration mode will allow you to take five measurement points along a straight line – at a maximum distance of 60 inches. The full version on both platforms will let you do what you need in measurement points and in length! If you take a few minutes to try out the Rotalign® Pro's demo firmware already installed on your Rotalign Pro system you will want one of these bracket sets! There is a problem though as we only have one set at the price shown below! One (1) L 540SET Straightness fixed bracket set consisting of: L 541 straightness movable bracket, L 543 straightness fixed bracket and L 544 straightness magnetic base, including plastic carrying case. As a bonus we are including a L 542 Straightness adjustable bracket for the Optalign® Plus or Aligneo® Reflected Beam systems! This package is being sold for less than half the current selling price at only $815.00 USD! Important: Only one set is available at this price! Our extremely popular website is seen worldwide so if you want this set – do not hesitate! Need a Quotation on these brackets call 704-233-9222 or, send us an email! Note: The Optalign® Plus or Aligneo® systems can also be used to check Straightness utilizing an Excel Spread Sheet. If you have any Firmware Questions contact your local Representative or Distributor as we are not selling firmware any longer! _____________________________________________________________________   Send E-mail Bracket Catalog   _____________________________________________________________________ We accept Purchase Orders, Visa and Master Card cards direct. Or if you prefer, you can pay us securely with any major credit card through PayPal! Contact us at 704-233-9222 or by email for details. Top of Page ___________________________________________________________